Subscribe to news

The factory "STP cable" developed new PPC brand

The factory STP cable developed new PPC brand

7 November 2013, 12:45
Tags: STP cable, cable

1743 views

Cable factory "STP cable" has mastered a new type of cable products of NYY, NYCY, NYBY brands which are made ​​according to European standards: AZS 417-2010 (IEC 60502-1). At the moment they have already started making the following brands of cable:

NYCY 0.6/1кВ



Construction:
1. Conductor (copper) - of Class 1 and 2 according to GOST 22483 (IEC60228);
2. Insulation - PVC plastic;
3. The general laid-lived population;
4. Screen - concentric outer conductor of copper wires, entwined with copper ribbon;
5. The outer shell - PVC;

Technical characteristics:


Rated AC voltage with a frequency of 50 Hz

0,66/1kV

The maximum AC voltage with frequency of 50 Hz

1.2 kV

Test AC voltage with frequency of 50 Hz, 10 min.

3.5 kV

The maximum operating temperature of the conductor

+70˚С

The temperature of conductors for a short circuit period

+160˚С

Cable bending radius

15 x Ø cable

Application:
The power cable is used in power plants, in distributive and industrial devices in local networks. This cable is designed for installation in the soil and in cable ducts, open-air and in the water, as well as indoors, at a time when you need greater mechanical protection from contact voltage.

NYBY 0.6/1кВ

Construction:
1. Conductor (copper) – of Class 1 and 2 according to GOST 22483 (IEC60228);
2. Insulation - PVC plastic;
3. The general laid-lived population;
4. Armor - two galvanized steel strips;
5. The outer shell - PVC plastic;

Application:
The cable is laid in the ground (soil), in ducts, in open space. It is used in industrial facilities, in road transport - to connect the signal and command equipment and facilities in areas where there is no risk of mechanical damage to the cable. In the event of an extended parallel with energy cables and overhead lines it is necessary to test their impact on the quality of the transmitted signal.

NYY 0.6/1кВ

Construction:
1.Conductor (copper) – of Class 1 and 2 according to GOST 22483 (IEC60228);
2. Insulation - PVC plastic;
3. The general laid-lived population;
4. The outer shell - PVC plastic;

Application:
These cables are used with stationary installations with a rated voltage of 0.6 / 1 kV, 50 Hz. Cable NYY has a climatic design UHL, which means that it is designed for use in the macro-regions with temperate and cold climates.